Antiluce

Antiluce is the registered trade name of Albert Jagger Ltd for its fasteners.

Our standard size Antiluce have been load tested to a safe working load of 375kg.

Please note all threaded Antiluce are supplied with nuts unless otherwise requested.

All mild steel Antiluce are zinc plated as standard, but can be supplied mill finish if required.

We can manufacture Antiluce fasteners other than our standard range to your specific requirements. Please contact us if you have an application that our standard range does not fulfill.

Standard Antiluce

	3232 weld on, with shank Material: mild steel Standard finish: zinc plated Boss diameter:19mm Shank diameter:12.7mm Shank length: 12.7mm Boss length: 39mm
	3232/NS weld on, no shank Material: mild steel Standard finish: zinc plated Boss diameter:19mm Boss length:26mm
	3240 internal thread Material: mild steel Standard finish: zinc plated Boss diameter:19mm Shank diameter:13.8mm Shank length:15.8mm Boss length:42mm

This fastener is useful for threading bolts into, or threaded rod cut to a required length for a particular application.

	3275/1 25mm thread Material: mild steel Standard finish: zinc plated Boss diameter: 19mm Shank diameter: 12mm Shank length: 25mm Boss length: 51mm Thread: M12 Nut: M12 Nyloc, zinc plated
	3275/2 53mm thread Material: mild steel Standard finish: zinc plated Boss diameter: 19mm Shank diameter: 12mm Shank length: 53mm Boss length: 80mm Thread: M12 Nut: M12 Nyloc, zinc plated
	3275/P plain shank, weld on Material: mild steel Standard finish: zinc plated Boss diameter: 19mm Shank diameter: 12mm Shank length: 55mm Boss length: 80mm
	3290/1 straight plate Material: mild steel Standard finish: zinc plated Boss diameter: 19mm Boss length: 45mm Plate size: 105 long x 25 wide x 5mm thick Mounting holes: 2 @ 7mm diameter
	3290/2 cranked plate Left or right-handed Material: mild steel Standard finish: zinc plated Boss diameter: 19mm Boss length: 45mm Plate size: 105 long x 25 wide x 5mm thick Mounting holes: 2 @ 7mm diameter

Baby Antiluce

	3274 weld on Material: mild steel Standard finish: zinc plated Boss diameter: 12.7mm Shank diameter: 8mm Shank length: 10mm Boss length: 30mm
	3281 long weld on Material: mild steel Standard finish: zinc plated Boss diameter: 12.7mm Boss length: 49mm

This fastener is designed for use with scaffolding.

	3285 threaded Material: mild steel Standard finish: zinc plated Boss diameter: 12.7mm Shank diameter: 8mm Shank length: 21mm Boss length: 41mm Thread: M8 Nut: M8 hex zinc plated
	3284 S/S 40mm thread Material: stainless steel (Grades: boss 303, cotter 304, rollpin 420) Boss diameter: 12.7mm Shank diameter: 8mm Shank length: 40mm Boss length: 59mm Thread: M8 Nut: M8 hex stainless steel
	3284/NS S/S no shank, weld on Material: stainless steel (Grades: boss 303, cotter 304, rollpin 420) Boss diameter: 12.7mm Boss length: 19mm
	3287 S/S 21mm thread Material: stainless steel (Grades: boss 303, cotter 304, rollpin 420) Boss diameter: 12.7mm Shank diameter: 8mm Shank length: 21mm Boss length: 41mm Thread: M8 Nut: M8 hex stainless steel